Looking for:
Toro lawn mower repair manual |
Toro lawn mower repair manual. Toro Lawn Mower Manuals
Toro Lawnmower Manuals for sale | eBay
This rotary-blade, walk-behind lawn mower is intended to be used by residential homeowners. It is designed primarily for cutting grass on well-maintained lawns on residential properties. Using this product for purposes other than its intended use could prove dangerous to you and bystanders.
Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage. You are responsible for operating the product properly and safely. Visit www. Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready.
Figure 1 identifies the location of the model and serial numbers on the product. Write the numbers in the space provided. Important: With your mobile device, you can scan the QR code on the serial number decal if equipped to access warranty, parts, and other product information. This manual identifies potential hazards and has safety messages identified by the safety-alert symbol Figure 2 , which signals a hazard that may cause serious injury or death if you do not follow the recommended precautions.
This manual uses 2 words to highlight information. Important calls attention to special mechanical information and Note emphasizes general information worthy of special attention. It is a violation of California Public Resource Code Section or to use or operate the engine on any forest-covered, brush-covered, or grass-covered land unless the engine is equipped with a spark arrester, as defined in Section , maintained in effective working order or the engine is constructed, equipped, and maintained for the prevention of fire.
Replacements may be ordered through the engine manufacturer. As configured to meet safety, emission, and operating requirements, the actual engine torque on this class of mower will be significantly lower. The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Use of this product may cause exposure to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
This product is capable of amputating hands and feet and of throwing objects. Always follow all safety instructions to avoid serious personal injury or death. Do not put your hands or feet near moving parts or under the machine.
Keep clear of any discharge opening. Do not operate the machine without all guards and other safety protective devices in place and functioning properly on the machine.
Keep bystanders and children out of the operating area. Do not allow children to operate the machine. Allow only people who are responsible, trained, familiar with the instructions, and physically capable to operate the machine. Stop the machine, shut off the engine, and wait for all moving parts to stop before servicing, fueling, or unclogging the machine. Improperly using or maintaining this machine can result in injury. To reduce the potential for injury, comply with these safety instructions and always pay attention to the safety-alert symbol , which means Caution, Warning, or Danger—personal safety instruction.
Failure to comply with these instructions may result in personal injury or death. Safety decals and instructions are easily visible to the operator and are located near any area of potential danger.
Replace any decal that is damaged or missing. Important: Remove and discard the protective plastic sheet that covers the engine and any other plastic or wrapping on the machine.
Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition. Remove the handle knobs and corresponding bolts from the machine housing A of Figure 3. Position the upper handle on the lower handles and then unfold the handle B of Figure 3.
Install the handle knobs with the corresponding bolts and tighten them firmly by hand C of Figure 3. Important: To start the engine safely and easily whenever you use the machine, install the recoil-starter rope in the rope guide.
Important: If the oil level in the engine is too low or too high and you run the engine, you may damage the engine. A selection of Toro approved attachments and accessories is available for use with the machine to enhance and expand its capabilities.
Contact your Authorized Service Dealer or authorized Toro distributor or go to www. To ensure optimum performance and continued safety certification of the machine, use only genuine Toro replacement parts and accessories. Replacement parts and accessories made by other manufacturers could be dangerous, and such use could void the product warranty. Note: Determine the left and right sides of the machine from the normal operating position. Always shut off the machine, wait for all moving parts to stop, and allow the machine to cool before adjusting, servicing, cleaning, or storing it.
Inspect the area where you will use the machine, and remove all objects that could interfere with the operation of the machine or that the machine could throw. Contact with the moving blade will cause serious injury. Do not put your fingers under the housing. Fuel is extremely flammable and highly explosive. A fire or explosion from fuel can burn you and others and can damage property. Fill the fuel tank outdoors, in an open area, when the engine is cold. Wipe up any fuel that spills. If you spill fuel, do not attempt to start the engine.
Avoid creating a source of ignition until the fuel vapors have dissipated. Fuel is harmful or fatal if swallowed. Long-term exposure to vapors can cause serious injury and illness. Important: If the oil level in the crankcase is too low or too high and you run the engine, you may damage the engine. Adjusting the cutting-height levers could bring your hands into contact with a moving blade and result in serious injury.
Adjust the cutting height as desired. Set all wheels to the same cutting height Figure Wear appropriate clothing, including eye protection; long pants; substantial, slip-resistant footwear; and hearing protection.
Tie back long hair and do not wear loose clothing or loose jewelry. Use your full attention while operating the machine. Do not engage in any activity that causes distractions; otherwise, injury or property damage may occur. The blade is sharp; contacting the blade can result in serious personal injury. Shut off the engine and wait for all moving parts to stop before leaving the operating position.
When you release the blade-control bar, the engine should shut off and the blade should stop within 3 seconds. If not, stop using your machine immediately and contact an Authorized Service Dealer. Keep bystanders out of the operating area. Keep small children out of the operating area and under the watchful care of a responsible adult who is not operating the machine. Stop the machine if anyone enters the area. Operate the machine only in good visibility and appropriate weather conditions.
Do not operate the machine when there is the risk of lightning. Wet grass or leaves can cause serious injury if you slip and contact the blade. Avoid mowing in wet conditions. Use extreme care when approaching blind corners, shrubs, trees, or other objects that may block your view. Do not direct the discharge material toward anyone. Avoid discharging material against a wall or obstruction; material may ricochet toward you. Stop the blade s when crossing gravel surfaces.
Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could cause you to lose your balance or footing. If the machine strikes an object or starts to vibrate, immediately shut off the engine, wait for all moving parts to stop, and disconnect the wire from the spark plug before examining the machine for damage. Make all necessary repairs before resuming operation. Before leaving the operating position, shut off the engine and wait for all moving parts to stop.
If the engine has been running, it will be hot and can severely burn you. Keep away from the hot engine. Operate the engine only in well-ventilated areas.
Exhaust gases contain carbon monoxide, which is an odorless, deadly poison. Check the grass catcher components and the discharge chute frequently for any wear or deterioration and replace them with genuine Toro parts when necessary. Mow across the face of slopes; never up and down. Use extreme caution when changing direction on slopes. Hold the blade-control bar against the handle A of Figure Pull the recoil-start handle B of Figure Note: When you pull the recoil-start handle, pull it lightly until you feel resistance, then pull it sharply.
Allow the rope to return to the handle slowly. Note: If the machine does not start after several attempts, contact an Authorized Service Dealer. To engage the self-propel drive, pull the self-propel-drive bar to the handle and hold it Figure Note: The maximum self-propel-drive speed is fixed. To reduce the speed, increase the space between the self-propel-drive bar and the handle.
No comments:
Post a Comment